Online : 2
Today : 87
This month : 7617
Total : 1118271
BT Series: Vertical Self Priming Screw Pump
BT Series:
Vertical Self Priming Screw Pump
Flow: <190M³H
Head: <12 Bar
DN: 125 - 250mm
Temp: < 160°C
The Azcue BT Series is a self priming positive displacement pump which has three spindles, one driving and two driven or idle spindles. The BT Series has three spindles rotating inside the pump which creates sets of moving seals from suction to discharge. These sets of seals form fully enclosed cavities moving axially and softly from inlet to outlet.
This pumping design and construction enables quiet fluid handling without pulsations and turbulence enabling the pump to rotate at high speeds with high reliability.
Applications:
The pump fluid must be clean, lubricating and not corrosive to ferrous metals. They are mainly applied for lube-oil pumping and fuel pumping (diesel oil or fuel oil). Applications in which the BT Series of pumps are regularly used for are:
Lubricant Media
Lube Oil
Gasoil diesel and Fuel transfer and feed
Gear Box Lubrication
Low pressure hydraulic
Viscosities from 2 to 1.500 cSt (mm 2/s)
Main forbidden fluids: water, alcohols, benzol, dilute acids etc.
Driving:
The BT series screw pumps are coupled to flexible coupling and driven normally by electric motors. They can also be driven by petrol, diesel, pneumatic or hydraulic motors. Electrical motors in B5, B3 or V1 execution, IP55 or IP23 protection, according to IEC.
Filters:
The filters are necessary in order to prevent pump damage caused by fluid carrying solid impurities.
Recommended filter meshing:
Lube-oil in general: 0.4 - 0.8mm
Gas-oil: 0.2 - 0.6mm
Heavy fuel-oil: 0.6 - 1mm